Please use this identifier to cite or link to this item: http://repository.vnu.edu.vn/handle/VNU_123/58198
Title: Sn/Al2O3/C/CNT composite prepared by wet milling as anode material for lithium-ion cells
Authors: Sandhya, C.P.
John, Bibin
Gouri, C.
Keywords: Tin;Anode;Carbon nanotubes;Lithium-ion cells
Issue Date: 2017
Publisher: H. : ĐHQGHN
Abstract: Sn/Al2O3/C/CNT (SAC/CNT) composite was synthesized by a simple wet milling route. The physico-chemical, structural and morphological properties of the material were studied. The electrochemical performance of the composite as an anode material in Li-ion cells was evaluated by Cyclic Voltammetry (CV), chargeedischarge cycling and electrochemical impedance measurements. The SAC/CNT materialdelivered an initial specific capacity of 835 mAh g-1 with the coulombic efficiency of ~77% along with good chargeedischarge cycle performance retaining ~88% of the initial capacity after 35 cycles. A com-parison of the results with those for Sn/C (SC) and Sn/Al2O3/C (SAC) showed that the SAC/CNT composite exhibited better overall performance compared to the other two materials. The enhanced performance of SAC/CNT is attributed to the combined effect of the buffer action provided by Al2O3 accommodating volume changes of the electrode during cycling and the reduced charge transfer resistance of the electrode resulting from the inclusion of conductive CNTs
Description: p. 210-214
URI: http://repository.vnu.edu.vn/handle/VNU_123/58198
ISSN: 2468-2284
Appears in Collections:Advanced Materials and Devices

Files in This Item:
Thumbnail

  • File : Sn-Al2O3-C-CNT-composite-prepared-by-wet-milling-as-anode-material-for-lithium-ion-cells_2017_Journal-of-Science-Advanced-Materials-and-Devices.pdf
  • Description : 
  • Size : 936.96 kB
  • Format : Adobe PDF


  • Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.